鋁鋁合金1.4313是馬氏體級，耐生銹性好，滲碳后耐用性好。X3CrNiMo13-4鋼的自動化設備功效是會因為生物學好分中鉬和鎳的高份量。哪些鋁合金加入劑影響了加強級碳份量的要求——給定滲透壓差不多于奧氏體鋁鋁合金。只不過鎳份量低，但鎳份量約為4%，有明顯不斷提高了鋼對很多生銹情況的反抗力——2次自動化設備功效。X3CrNiMo13-4鋼顧客可產生更是高達300℃在水溫下上班的配件和配件，甚至外露在很多生銹情況中的配件，與此同時始終維持足以的表明先決狀態括抗氯化物特征)。QT650.QT780和QT900先決狀態下，滲碳后最應交付使用鋼管。半制成品于是由產生.化工品.在冶金材料和自然能源這個行業，增壓機外露在高溫和性溫度下.泵.收縮機元件。鋼不適感合焊接工藝。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50現貨供應EN1.4313馬氏體304不繡鋼具備著固溶處理特征參數（+A）環境、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，必須 哪一兩個必然要跟業務范圍說模糊哦。